HYUNDAI LED LCD Service Mode By Imran Ashraf

By Imran Ashraf Khan
HYUNDAI HU-D25A percent S3P8849XZZ-A089 chassis 5N11. 
Entering the service at the same time, press the toggle switch and VOL + and VOL-- on the TV panel. 
search "MENU" .Processor LC863322B. 
To enter MENU - three times pressing the hidden key in the remote (the lowest right). 
Switching the MENU is done by pressing the MUTE key. 
Other switching and selection of parameters (+), (-) channels, (+), (-) loudness. 
Pressing the hidden key twice in the remote control (the lowest right one) is on the screen: B / W BALANCE S-BRI - 76 when you press the MUTE key in this case - a thin horizontal strip in the center of the screen to adjust the geometry. 
Exit the menu - hidden key in the remote (the lowest right). 
Chassis 5Y19 H-TV2910SPF percent LA76938N 7N
entrance to the service-hidden button in the remote control. HU-TV2121 percent N403 KALORA HHEN16MD01. Video LA76810A 
The lowest hidden button, (to the right of the chip) is pressed once, FACTORY will be displayed. 
Next P + and P- switch options. 

Hyundai H-TV2902PF chassis EC6510T 
1. Enter the service menu: press the buttons of the remote control "SM", INFO (square with a cross) and "CH I / II" sequentially. 
2. Enter the required submenu: 
geometry - buttons "1" and (or) "2", 
white balance - button "3", 
options 1 - button "4", options 2 - button "5". 
3. Parameter selection: "PROG +" and "PROG -" remote control buttons. 
4. Change the value of the parameter: the "VOL +" and "VOL -" buttons on the remote control.
5. Enter the setting mode G2: button "0" remote control. 6. Exit from the G2 setup mode: the "PROG -" button on the remote control. 
Simultaneous exit from G2 mode and service menu is allowed (item 7). 
7. Exit the service menu: the INFO button (square with a cross) on the remote control. 
C2910, C2519, C2988 
1. Set the volume - 0 
2. Press the "MUTE" button on the remote control 
3. While holding the "MUTE" button, press the "MENU" button on the front panel of the TV. 
4. On the screen in the right corner the letter "D" will light up, and in the left corner the adjustable parameter and its value will light up. 
5. Menu pages are changed with the "CAL" button. 
Switching of parameters is made by green and red buttons on the blue field of the remote control.

H-LCD2000 
Press MENU and STANDBY simultaneously to enter the service mode 
Press MENU again. 

HYUNDAI H-TV2910PFS - 5Y19 
Entering the service menu TV opening the top cover of the remote control. 
The sticker on the remote control is better not to remove, but to disassemble the remote control. 
Under the label there are no hidden buttons, there is no also a rubber band on this button (see photo) mode "FACTORY". 
OPERATION WITH THE SERVICE MENU 
1. Switching in the service mode is carried out on all pages by the buttons "0" downwards and "9" upwards 
2. Press the "P +" or "P-" 
buttons to select the "SWITCH" line 3. Adjust the modes with the "Vol +" buttons or "Vol-" remote control 0806-RC1345-19 
4. Pressing the "PROD" button - entering the service 
5. 2nd press - kn. "PROD", and k. MUTE - reg. accelerating
6. Press the 3-second kn. "PROD" - MENU 0ggles the menu. MUTE (MENU 0-22) 
7. 4th press - BUS OPEN 
8. 5th press - exit the service 
9. Then all the options in the service instructions in the tech. documentation. 


HYUNDAI HU-D25A percent S3P8849XZZ-A089 chassis 5N11. 
Entering the service at the same time, press the toggle switch and VOL + and VOL-- on the TV panel. 
search "MENU" .Processor LC863322B. 
To enter MENU - three times pressing the hidden key in the remote (the lowest right). 
Switching the MENU is done by pressing the MUTE key. 
Other switching and selection of parameters (+), (-) channels, (+), (-) loudness. 
Pressing the hidden key twice in the remote control (the lowest right one) is displayed on the screen:
B / W BALANCE S-BRI-76 when pressing the MUTE key in this case 
- a thin horizontal strip in the center of the screen to adjust the geometry. 
Exit the menu - hidden key in the remote (the lowest right). 
Chassis 5Y19 H-TV2910SPF percent LA76938N 7N 
entrance to the service-hidden button in the console. 
HU-TV2121 percent N403 KALORA HHEN16MD01. Video LA76810A 
The lowest hidden button, (to the right of the chip) is pressed once, FACTORY will be displayed. 
Next P + and P- switch options. 
By Imran Ashraf Khan
Hyundai H-TV2902PF chassis EC6510T 1. 
Enter the service menu: press the buttons of the remote control "SM", INFO (square with a cross) and "CH I / II" sequentially. 
2. Enter the required submenu: geometry - buttons "1" and (or) "2", white balance - button "3"
options 1 - button "4", options 2 - button "5". 
3. Parameter selection: "PROG +" and "PROG -" remote control buttons. 
4. Change the value of the parameter: the "VOL +" and "VOL -" buttons on the remote control. 
5. Enter the setting mode G2: button "0" remote control. 
6. Exit from the G2 setup mode: the "PROG -" button on the remote control. Simultaneous exit from G2 mode and service menu is allowed (item 7). 
7. Exit the service menu: the INFO button (square with a cross) on the remote control. 
C2910, C2519, C2988 
1. Set the volume - 0 
2. Press the "MUTE" button on the remote control 
3. While holding the "MUTE" button, press the "MENU" button on the front panel of the TV. 
4. On the screen in the right corner the letter "D" will light up, and in the left corner the adjustable parameter and its value will light up. 
5.
Switching of parameters is made by green and red buttons on the blue field of the panel. 
Change the parameters in the yellow and blue buttons on the blue field. 
H-LCD2000 
To enter the service mode, simultaneously press <MENU> and <STANDBY> Press MENU again. 

HYUNDAI H-TV2910PFS - 5Y19 
Enter the TV service menu to hide the top cover of the remote control. 
The sticker on the remote control is better not to remove, but to disassemble the remote control. 
Under the label there are no hidden buttons, 
there is no also a rubber band on this button (see photo) mode "FACTORY". 
WORKING WITH THE SERVICE MENU 
1. Switching in the service mode is carried out on all pages by the buttons "0" downwards and "9" upwards. 
2. Use the buttons "P +" or "P-" to select the line "SWITCH"
3. Adjust the modes with the buttons "Vol +" or "Vol-" remote control 0806-RC1345-19 
4. Press the "PROD" button - enter the service. 
5. 2nd press - the button. "PROD", and k. MUTE - reg. accelerating. 
6. Press the 3-second kn. "PROD" - MENU 0 Switching the menu of the book. MUTE (MENU 0-22). 
7. Press the 4th BUS BUS .8. 5th click - exit the service. 
9. Further all the options for the service instructions in those. documentation. 


HYUNDAI H-TV1400, H-TV1401, H-TV21OOPF, H-TV21O1 Chassis 3Y11 SANYO 
Remote control Hyundai BC-1202A 
Processor IC001 LA8633XX. 
Service menu: Press in sequence from the remote control [MENU], [MENU], [Q.VIEW], [MUTE]. 
Switching modes is the [SLEEP] button. 
Exiting the service menu is the [MENU] button

LED LCD TV SOFTWARE

LCD LED TV Software Are Available With PayPal and Credit Card .
Received Your required Software within 24 hour by your giving email address or contact us at lcdledebooks@gmail.com

1.China Universal TV Board V59.031 all resolutions​ Get it Now.

 

2.China Universal TV Board ITV V59.031.13 all resolutions​ get Now.

 

3.China Universal TV Board TR85.031 all resolutions​ Get it Now.

 

4.China Universal TV Board VST56.U11.2 all resolutions​ for Sony Get it Now.

 

5.China Universal TV Board VST56.U11.2 all resolutions​ for Samsung Get it Now.

 

6.China Universal TV Board VST56.U11.2 all resolutions​ for LG Get  it Now.

 

7.China Universal TV Board VST56.03 all resolutions get Now.

 

8.China Universal TV Board VST.59c all resolutions​ get Now.

9.China Universal TV Board V59 PB816 get Now.

10.China Universal TV Board TP.MS338. PC821 Full Upgrade Version Get It Now.

11.T.MS18VG.72B.12023 (3) Softwares Pack Avalaible Just 10 USD Get it now

 

12.Software for V56U.B48 main board Software are available.

 

Other Combo Boards Softwares Also Available.

Buy Now These Software's as a package deal with Paypal and Credit Card With Full Protection.

Software List 

TR85.031

VST.V59.031

V.TV9G.02

T.AM7633M.671

TP.VST59-P81

TP.VST59-P83

T VST56.U112

TP.VST59.P91

TP.VST59.PB631

TP.VST59.PB716

TP.VST59.PB726

TP.VST59.PB768

TP.VST59.PB813

TP.VST59.PC815

TPMS608.P83

TPSIS231.P83 Hisense

TPSIS231.PT851G

CV182.H-F

CV.MV26L.G

CV9202H-TPW

 

Sony Samsung LG Haier Philips Changhong Ruba Sharp Toshiba Videocon Intex TCL China Universal and Other Major Brands Software's are available for more details please WhatsApp us or email us.

Also buy single range software in just 10 USD for more details please contact us at +923139292880

Or email us at lcdledebooks@gmail.com

Printed LCD LED TV Repairing Book

Famous LCD LED TV Repair Books are Available

Writer Imran Ashraf 

A Book For Beginners And Technicians
Book Detail 

• 290 Colour Pages With Clear Pictures And High Quality Printing Crystal and Big Pages
• Book Waight 1 kg
• Language English
• Book Price 900/INR With Courier Charges

Book Content

1. Black Screen Problem Only Show Backlight
2. Water Damage and Burn Tracks Problems
3. Main Board Working Principle Chip On Film/Foil(COF)
4. COF Shortage Removing Method
5. Software Problem
6. EMMC Connection
7. OLED Panel Guide
8. Double Image Problem
9. COF Substitution

Customer Review About Book 

Please note: Books are available for India,UAE,Saudia,Kuwait,Nepal, Bangladesh

Imran Ashraf Successful Books 

WhatsApp Call Link

Old Book Review 

Hello friends Imran Ashraf here

The first LCD LED TV Panel Bypassing eBooks and Printed Books Writer,I Personally Help and Support TV Engineers Around the World this is my Specialized Job,Please Ask anything You want to need I will try my level best for you.

I can guide you Regarding Screen Tab Bonding Work, TV Software Firmware Issue,Panel Screen Problem, and many more.

Thank you very much

Master LCD/LED TV Repairing And Panel Bypassing

eBay Buying Link Please Click

Book Demo Available at Youtube

Master's LCD LED TV Repairing and Screen Bypassing Book By Imran Ashraf Khan

Details of BOOK:

1: 130 Full Colour Pages With Large Colour Images Front and Back Printed.

2: Big Page Size 23×36

3: Book wight 400 Gram

4: English Language

5: Photo Guide

6: Professional Approach 

Book Price with courier charges all India is only 1500/=

Deposit By Paytm accepted​

Paytm no.7895732472

 मरान अशरफ खान की पहली प्रिंटिड बुक है। इससे पहले वे कई ई-बुक लिख चुके हैं। इमरान अशरफ एक पुराने और मंझे हुए टेक्निशियन हैं। उनकी किताबों में वे फॉल्ट और उनका सोल्यूशन होता है, जो उन्होंने किए हुए होते हैं। मतलब प्रेक्टिकल फाल्ट फाइन्डिंग होती है। 
इस किताब में इमरान अशरफ ने एलजी, सोनी, सेमसंग आदि LCD और LED टीवी में आने वाले प्रॉब्लम्मस और उनके सॉल्यूलेशन को तस्वीरों के साथ दिया है। 
वे सीके्रट कोड दिए गए हैं, जो आसानी से उपलब्ध नहीं होते हैं। 

किस फॉल्ट में कौन सा कंपोनेंट खराब है या हो सकता है, तस्वीरों के साथ बताया गया है। 
कहां कितनी वोल्टेज आने चाहिए, न आने पर क्या फॉल्ट आ सकता है, इसे भी तस्वीरों के साथ बताया गया है। 
किताब अंग्रेजी में है, लेकिन बहुत आसान अंग्रेजी इस्तेमाल की गई है, जिसे समझना मुश्किल नहीं है। 
वे तकनीशियन, जो LCD/LED टीवी रिपेयर करते हैं, उनके लिए यह किताब बहुत उपयोगी हो सकती है।

lcdledebooks@gmail.com

LCD LED TV Protection Bypassing Notes

LCD backlight protection By Imran Ashraf Khan For Technican's Only.

Screen Black (no display) failure usually encounter some display only one lamp or circuit protection. For easy troubleshooting​ , we need to remove (by pass) method for break protection.

OZ9938 remove protection circuit: 
1. pin 3 short to ground
2. pin 6 short to ground
3. pin 7 short to ground, remove the grounding resistance ,to 
remove protection.
MP1038EY connecting wire pin 11 and pin 2 ,to remove 
protection.
TL5001 short pin 5 to ground ,to remove protection.
TL1451 short pin 15 to ground, to remove protection.
TL5451 short pin 15 to ground, to remove protection.
BA9741 short pin 15 to ground, to remove protection.
BA9743 short pin 15 to ground, to remove protection.
MB3775 short pin 15 to ground, to remove protection.
AT1741 short pin 15 to ground, to remove protection.
AT1380 short pin 2 to ground, to remove protection.
KA7500 short pin 1 and pin 16 to ground, to remove protection.
TL494 short pin 1 and pin 16 to ground. IF not work, short pin 4 to 
ground.
FA3629 short external capacitor over pin 15 and pin 16 
FA3630 short pin 7 and pin 10 to ground, to remove protection.
OZ960 OZ962 short pin 2 to ground, to remove protection.
OZ965 short pin 4 and pin 6 to ground, to remove protection.
OZ9RR short pin 8 and pin 9 to ground, to remove protection.BIT3101 Cavitate pin 2 and pin 15 pins (suck out the solder, let the 
pins float.)Imran Ashraf
BIT3102 Cavitate pin 5 
BIT3105 Cavitate pin 4
BIT3106 Cavitate pin 4 and pin 27 
BIT3107 Cavitate pin 4 
BIT3193 Pin 15 or pin 3
BIT3195 Break Protection Apply LED to pin 5 and Ground.
AAT1100 pin 8 short to ground, to remove protection.
AAT1107 pin 15 short to ground, to remove protection.
BD9884 short pin17 and pin 18 on the ground capacitance.
AAT1100 pin 8 short to ground, to remove protection.
AAT1107 pin 15 short to ground, to remove protection.
AT1380 short pin 2 to ground, to remove protection.
AT1741 short pin 15 to ground, to remove protection.
BA9741 short pin 15 to ground, to remove protection.
BA9743 short pin 15 to ground, to remove protection.
BD9884 short pin17 and pin 18 and ground the capacitance.
BIT3101 Cavitate pin 2 and pin 15 pins (suck out the solder, let the pins 
float.)
BIT3102 Cavitate pin 5
BIT3105 Cavitate pin 4
BIT3106 Cavitate pin 4 and pin 27
BIT3107 Cavitate pin 4
BIT3193 Cavitate pin 15 pin 3
FA3629 short external capacitor over pin 15 and pin 16
FA3630 short pin 7 and pin 10 to ground, to remove protection.
KA7500 short pin 1 and pin 16 to ground, to remove protection.
MB3775 short pin 15 to ground, to remove protection.
MP1038EY Connecting wire pin 11 and pin 2 ,to remove protection.
OZ960, OZ962, OZ1060 short pin 2 to ground, to remove protection.
OZ964 short pin 2 to ground, to remove protection. Tested 3/2015 on 
Sanyo 
DP42848
OZ965 short pin 4 and pin 6 to ground, to remove protection.
OZ9938 1. pin 3 short to ground. 2. pin 6 short to ground. 3. pin 7 shortto ground,
remove the grounding resistance ,to remove protection.
OZ9RR short pin 8 and pin 9 to ground, to remove protection.
TL1451 short pin 15 to ground, to remove protection.
TL494 short pin 1 and pin 16 to ground. If not work, short pin 4 to 
ground.
TL5001 short pin 5 to ground ,to remove protection.
TL5451 short pin 15 to ground, to remove protection.

For more details please contact +923139292880

Add more tips in comments area .

Smart LED Tv-software is nu verkrijgbaar voor de beste prijs.

Smart LED Tv Softwares nun haveblas ĉe plej bona prezo.

Smart LED Tv Softwares sont maintenant disponibles au meilleur prix.
Whatsapp +923139292880

All Types LCD LED TV Board Software's​

LCD LED TV Software Are Available With PayPal and Credit Card .
Received Your required Software within 24 hour by your giving email address or contact us at lcdledebooks@gmail.com

1.China Universal TV Board V59.031 all resolutions​ Get it Now.

2.China Universal TV Board ITV V59.031.13 all resolutions​ get Now.

3.China Universal TV Board TR85.031 all resolutions​ Get it Now.

4.China Universal TV Board VST56.U11.2 all resolutions​ for Sony Get it Now.

5.China Universal TV Board VST56.U11.2 all resolutions​ for Samsung Get it Now.

6.China Universal TV Board VST56.U11.2 all resolutions​ for LG Get  it Now.

7.China Universal TV Board VST56.03 all resolutions get Now.

8.China Universal TV Board VST.59c all resolutions​ get Now.

9.China Universal TV Board V59 PB16 get Now.

10.China Universal TV Board TP.MS338. PC821 Full Upgrade Version Get It Now.

11.T.MS18VG.72B.12023 (3) Softwares Pack Avalaible Just 10 USD Get it now

12.Software for V56U.B48 main board Software are available.

Other Combo Boards Softwares Also Available.

Buy Now These Software's as a package deal with Paypal and Credit Card With Full Protection.

Software List 

TR85.031

VST.V59.031

V.TV9G.02

T.AM7633M.671

TP.VST59-P81

TP.VST59-P83

T VST56.U112

TP.VST59.P91

TP.VST59.PB631

TP.VST59.PB716

TP.VST59.PB726

TP.VST59.PB768

TP.VST59.PB813

TP.VST59.PC815

TPMS608.P83

TPSIS231.P83 Hisense

TPSIS231.PT851G

CV182.H-F

CV.MV26L.G

CV9202H-TPW

Sony Samsung LG Haier Philips Changhong Ruba Sharp Toshiba Videocon Intex TCL China Universal and Other Major Brands Software's are available for more details please WhatsApp us or email us.

Also buy single range software in just 10 USD for more details please contact us at +923139292880

Or email us at lcdledebooks@gmail.com

LCD Screen Tester Available

Buy Your Own LCD LED TV Panel Tester For Your Service Center And Workshop For Quick Fault Findings With 100% Satisfaction.

(Delivery Time 7 Days Minimum)

LCD LED Panel Tester Tool Kit For TV Laptop Computer Repair+LVDS Cable+Inverter​s.

Buy Now With PayPal and Credit Card holder's With Full Protection  

Toshiba LCD LED Service Mode

TOSHIBA Entrance to the service menu: # Turn on the TV and press the MUTE button on the remote.Further, the MENU button on the TV cabinet while MUTE button on the remote. # Press the key "9" once and see in the top line of the operating time. # By pressing "9" on several occasions looking type of matrix. # Press AV input call screen of blue, red, green colors. Warning:the key "2" is not pressed in any case !!! (reason not specified, but according to unconfirmed reports is included white calibration mode) Exit - turn off the TV with the "network". 

4 eBooks Package Price 55 USD

Advanced and Professional Techincains Choice for Major Problems of display with other faults including in this ebook  volume1 and volume 2 supported Sharp Sony Samsung Toshiba Philips LG Panasonic and Major Brands Problem Like

LCD LED TV No Display,
Slow Motion Picture

 Grey Or Black Display,

 White Display,

Screen Double Images,

Display Jumping/Jurking,

 Display Distortion, Ghost 

Display Colour Change Solution,
Negative Image,S Solarization 

Horizontal & Vertical Lines/Bars,

Half Screen Display Problem
Mapping , Picture Freezing
Lines removing Method
Ghost Image Also many more
With big collection of

Cof Data including 
No1 eBook

Alright 

I Want This Ebook! What Do I Do Now?”

It’s easy to order. All you need to do is click on the link below, which will take you to the order page, and then you just enter your information in. The whole process only takes a minute or two. As soon as you have placed your order, you’ll immediately sent you through your email address where you can save the Ebook in your computer. And don’t worry, downloading the information is a real snap. (It works perfectly with both MAC and PC computers.) Also for Laptops , Tablets and Android Phones, There is no shipping and handling because it’s an electronic course. That means you won’t have to wait in order to begin using these strategies in your repair business. You can be on your way to success in just a few minutes. Even if you have never downloaded anything from the internet before, don’t worry, it comes with instructions. It’s so easy! All of the Screen Bypassing TV’s problems and solutions are revealed in a step-by-step, easy to understand format. This info-product is one-of-a-kind and not found in any BOOKSTORES!

Go ahead and click the order link below, and see what all the information is about. You’ll get instant access to the entire course even if it’s 4 am in the morning.

Your One-Time Investment Is

Only $55 USD

After Completing Your Payment We Will Send you Volume 1 With in 2 hours to your PayPal email account.

Learn how to repair Panel failures,T-con problem in LCD LED TVs with comprehensive guide line with Schematics and Pictures of Problems, This eBook (PDF) or (Doc)format was written for Advanced Level of Technician of LCD LED and Plasma TV repair and includes many Bypass method. If you want to become expert in this filed of LCD LED TV repair  than this is a good eBook for you. Maybe you have a broken LCD TV sitting at home or your workshop and you want to repair it quickly. No Problem who you are or what your reason is for wanting to repair LCD or LED TVs you have come to the right place.Once you have complete your purchase you will be sent a link to download a copy immediately.

Volume 1 ,

Volume 2 ,

Inverter Bypass eBook,

SMD Data Guide eBook.

Full package buying option 

1.LCD LED TV Panel Bypassing eBook Volume 1 Price Single eBook 20USD

Product Details:E-book Volume1 Format: Ms Office Doc Photo Guide (Not a hard copy book)
Pages: over 169pages (+ Bonuses)
File size: 24MB

Language: English
Bonus: Included Email Support and Bonuses of LCD/LED Panel repairing information!
Compatible with: Android Phones, PC, Laptop & MAC Computer

Price: $20 USD (Offer Price only!)

(Orignal price $39.95 USD)

2.LCD LED TV Panel Bypassing eBook
Volume 2 Price Single eBook 20USD

Product Details:E-book Volume2 Format: Ms Office Doc file with Photo(Not a hard copy book)
Pages: over 150 pages (+ Bonuses)
File size: 13MB

Language: English
Bonus: Included Email Support and Bonuses of LCD/LED Panel repairing information!
Compatible with: Android Phones, PC, Laptop & MAC Computer

Price: $20 USD (Offer Price only!)

(Orignal price $30 USD)

3.LCD LED TV Backlight Bypassing eBook Price 10 USD

Product Details:Backlight Bypassing eBook 1 Format: Ms Office Doc file (Not a hard copy book)
Pages: over 24 pages (+ Bonuses)
File size: 3.6MB

Language: English
Bonus: Included Email Support and Bonuses of LCD/LED Panel repairing information!
Compatible with: Android Phones, PC, Laptop & MAC Computer

Price: $10 USD (Offer Price only!)

(Orignal price $20 USD)

4. SMD Codes DataBook full Version 1060 Pages Price 10USD

Product Details:E-book SMD Data Format: Ms Office Doc file (Not a hard copy book)
Pages: over 1060 pages (+ Bonuses)
File size: 12 MB

Language: English
Bonus: Included Email Support and Bonuses of LCD/LED Panel repairing information!
Compatible with: Android Phones, PC, Laptop & MAC Computer

Price: $10 USD (Offer Price only!)(Orignal price $14 USD)